Hypex Nilai500DIY 500W Mono Kit

(2 customer reviews)

£690.00 UK VAT added in cart

This mono kit from Hypex is based on the Nilai500DIY amplifier module, which is the long awaited successor to the acclaimed NC400, and PS500DIY power supply. It features a brand new control-loop topology that really boosts performance to the next level. It outperforms NCORE by more than 10 times!

 

In stock

Hypex amp kit build service

Upgrade your Hypex kit to a fully built and tested turnkey solution, all you have to do it plug it in a play music.

Hypex Nilai unbranded Faceplate - Mono Silver - pair

This is a pair of unbranded faceplate for your Nilai 500 DIYclassD branded mono kits, sold in pairs.

 

Hypex Nilai unbranded Faceplate - Mono Black- pair

This is a pair of Black unbranded faceplates for your Nilai 500 DIYclassD branded mono kits, sold in pairs.

 

SKU: HYP-NILAI500DIY-MONOKIT Categories: , Tags: , , , ,

Description

The Nilai500DIY module comes with a fully discrete buffer stage and on-board voltage regulators, just like the NC400 it’s replacing. Together with carefully selected high-grade components, the Nilai500DIY is Hypex’s best sounding amplifier to date. It sets a new benchmark for high-end audio applications and is a truly unique amplifier module for the DIY community.

This mono kit combines the Nilai500DIY with the PS500DIY power supply and is the easy way to put together a high end power amplifier at a fraction of the cost in just 30-60 minutes. When combined with Hypex’s PreAmplifier kit you can create a complete set of superbly sounding equipment.

Warranty: 5 years / 20,000 hours

Key Features

  • Ultra Low Distortion
  • Very Low Idle Power
  • Very Low Noise
  • Very Low Output Impedance
  • Incorporates Audiophile Components

Specifications:

Inputs

  • 1 x Balanced XLR
  • 1 x Trigger 12V

Outputs

  • 1 x Gold Plated Binding Post Set (Banana plug, Spade plug or Bare wire)

This kit contains:

  • Complete DIYclassD Nilai500DIY mono case “matte black”,
  • Complete internal cable harness,
  • PS500DIY power supply,
  • Nilai500DIY amplifier module,
  • All needed mounting materials,
  • Easy to follow assembly instruction,
  • 1.5mm Allen key,
  • 2.5mm Allen key,
  • TX-10 Torx key,
  • TX-20 Torx key

In addition, you will need the following tools to complete the assembly:

  • Wire cutter (or combination pliers)
  • 5.5 mm hex nut driver (or combination pliers)
  • 7 mm hex nut driver (or combination pliers)
  • 3.5 mm flat type screwdriver

Datasheets and manuals:

Nilai 500 datasheet

PS 500 DIY SMPS datasheet

Technical Data

Technology Nilai
Power (2Ω) 500W @ 2Ω, 1 kHz, THD < 1%
Power (4Ω) 525W @ 4Ω, 1 kHz, THD < 1%
Power (8Ω) 260W @ 8Ω, 1 kHz, THD < 1%
Channels 1
Weight 3.45 kg
Dimensions mm 205*300*80 mm
Mains voltage input 100 – 240Vac
Automatic input voltage selection universal mains

Alternative un-branded faceplates are available in pairs for this kit

Silver face plate 

Black faceplate

Additional information

Weight 3.45 kg
Dimensions 40 × 30 × 8 cm
Technology

Nilai

Power (2Ω)

500W @ 2Ω, 1 kHz, THD < 1%

Power (4Ω)

525W @ 4Ω, 1 kHz, THD < 1%

Power (8Ω)

260W @ 8Ω, 1 kHz, THD < 1%

Channels

1

Weight

3.45kg

Dimensions

205 x 300 x 80mm

Mains Voltage Input

100 – 240V AC

Automatic Input Voltage Selection

Universal Mains

2 reviews for Hypex Nilai500DIY 500W Mono Kit

  1. David Herd

    The kit is very simple, anyone with some common sense can put these kits together! It is a few months now since I put mine together and I have to say I’m very happy with the mono-blocks. Initially I had a slight hum problem because I was running the pre-amp section of my integrated valve amp, using unbalanced adaptor cables. The Nilai’s still sounded excellent and didn’t take too long to “run in”. I then managed to get a valve pre-amp with balanced outputs; hum problem solved but the pre-amp now had to be run in. The combination now sounds pretty stunning I think. Plenty of power on tap, black backgrounds and sweet (But not sugary!)highs, clean and well defined low end. Midrange is detailed, acurate (Timbre) and agile. Brass sounds like brass and strings – cello, violin and guitar – are pure and realistic (If the recording is up to it!). These kits are not cheap, but I think they still represent a clear bargain. The rest of the system is; Auralic Aries G1, Oppo udp 205 (Mainly used as a DAC, but also for disc spinning.) Pro-Ject Pre-amp RS (New old stock), Hypex Nilai 500’s and Audiophysic Spark III speakers. All power is routed through a Puritan psm156 (DC blocker). Thoroughly recommended. KJF audio was spot on for service and a pleasure to deal with!

  2. Chris Legg (verified owner)

    I’ve had my Nilai monos for just over a year now so I thought perhaps time to give some feedback. First, the buying experience. If you feel nervous about dealing with a small business like KJF, don’t be. Stefan was a pleasure to deal with (and he has a dry sense of humour!). He very readily got back to Hypex on a small post-sale issue, which was in fact caused by my home crafted power lead. Now, making the kits. It really was easy. Just take it steady, follow the visual instructions and you get there. No soldering required. It helps to slacken off the casing screws slightly when sliding the lid panel into place, but that’s all I can really add here. The casework is a series of panels which fit precisely – very precisely! – together. Serviceable rather than beautiful, the finished unit has a distinct sense of solidity. How does they sound? I would use terms like ‘quick’, ‘detailed’, ‘open’, ‘non-fatiguing’. But I’m not sure how much that helps anyone else. The fact is I don’t really notice them now. I just listen to the music. So if these Hypex Nilai500s have a ‘sound’, I really, really like it. Any criticisms? The standby button is tiny, invisible on the casework and I have to locate it by feel. A circular, edge illuminated switch like my RME DAC would have been preferable. That’s it. Otherwise, these are really great pieces of kit.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.