Hypex NCORE NC400 Mono-Block Amplifier DIY Kit

£523.52 UK VAT added in cart

This Mono amp kit kit removes all of the leg work in building a legendary Hypex NC400 NCORE amplifier, everything you need is included so with a little time and some tools you will have your own amplifier.

Out of stock

SKU: HYP-NC400-MONO-KIT Category: Tags: , , , ,

Description

As the Official UK distributor for Hypex products we are pleased to stock this great NC400 Ncore amplifier kit.

If you have found this page you know already just how good the Ncore amplifier modules from Hypex are and are maybe already thinking of building your own DIY Ncore amp with these modules. This kit removes all of the leg work, everything you need is included so with a little time and some tools you will have your own amplifier. This is a Mono kit so if you are running stereo, you will need to purchase 2 of these.

Contents of packaging

  • Hypex DIY Mono-Block Case
  • NCORE NC400 Amplifier Module
  • SMPS600N400 Switch Mode Power Supply
  • Power Connector IEC 60320 C14 fused (incl. 5 AT fuses)
  • On-Off Switch
  • Pair of Binding Posts
  • Signal Cable with XLR Female Chassis connector
  • Internal Speaker Wires
  • Internal Mains Wires
  • Protective Earth Cables
  • Screws, Bolts and Washers

The kit does not include an external “kettle” type power cable.

Additional tools required

  • Cross-head Screwdriver
  • Small Flat-head Screwdriver
  • 2.5 Allen/Hex Key
  • Cutting Pliers
  • Cable ties
  • Glue (optional) to fix mains input and switch

No soldering is required.

Resources

The manual/assembly instructions are available here.

A very nice construction video can be found here

Additional information

Weight 3.1 kg
Dimensions 20 × 8 × 28 cm
Internal Dimensions

193mm(W) x 58mm(H) x 265mm(D)

External Dimensions

200mm(W) x 79mm(H) x 280mm(D) including feet, but excluding connectors

Module Type

NCORE

Power (4Ω)

400W

Channels

1

HxR Ready

On Board

Weight

3.1kg

SMPS Voltage +/-

2*65Vdc

1 review for Hypex NCORE NC400 Mono-Block Amplifier DIY Kit

  1. Barny

    After much deliberation, research and saving-up, I bought a pair of these and some leads from Stefan at KJF Audio. They are incredible. Everything required is included and these build up into some very sturdy, high-class looking blocks – oozing quality. The build is easy – an hour each, even if going carefully, so they are an assembly job rather than a kit. No soldering. No multimeter. No screen/buttons/settings/nonsense. The instructions could be fuller, but you cannot really go wrong, and others have made videos that you can follow if you lose your nerve. Power – enough to lift the roof. Sound – incredible – see Amir’s review at ASR… these modules were chart-topping for many years, you cannot do much better. The cables were beautifully made too.
    These are power amps for the connoisseur and deserve to be twinned with capable speakers and a pure signal. I doubt I will ever buy another – they are built to last.
    I cannot recommend more highly. And great service too – fantastic to be able to support an independent UK company, and a European centre of expertise with a single purchase.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…