Other included components for SL11-SDA active speaker kit (Pluvia 11 & Alpair 11MS)

Terminal cup with colour-coded gold binding posts in a circular recess.

Our heavy weight recycled wool felt  is manufactured from 100% recycled fibres. at 15mm thick It is suitable for damping the walls of a speaker cabinet

This black plastic bass reflex port tube has an internal Diameter of 36mm; while the length of this speaker port tube is 117mm.

Ten self-tapping screws for fixing the terminal cup (four screws needed) and plate amplifier (six screws needed) to the cabinets - the screws for fixing the drivers to the cabinets are included in driver box.

1 metre length of Van Damme OFC 0.75mm2 speaker cable to use when making up the internal cable to connect one of the drivers with the terminal cup in the "passive" cabinet. An unterminated cable is included with plate amplifier.

These push-on crimp Connectors,  are gold plated for better anti corrosive contact.

These are sold in pairs and come with their clear silicone insulation boots so you have enough for one loudspeaker driver unit per purchase.

The type of insulation cover supplied with these is superior to the integrated boot more often seen with this type of connector as it gives the option for soldering and for better mechanical contact when crimping.

Six 4.7mm gold plated crimp terminals with insulation boots. Four are to use when making up the internal cable to connect the one of the drivers with the terminal cup in the "passive" cabinets, and the remaining two are to terminate the cable supplied with the plate amplifier.

Stick on rubber/silicon feet.