Pre-built Cabinets (pair)

This cabinet has a cutout for a terminal cup on the rear panel. The front baffle for this cabinet has the recessed cut-out and pre-drilled holes for the Markaudio CHN-50 driver. It is not compatible with the Markaudio Alpair 5.3 driver.

This flatpack cabinet has the recessed cut-out and pre-drilled holes for the Markaudio Alpair 5.3 driver on the front baffle and a cutout for the Arylic Up2Stream wireless plate amplifier on the rear panel. It is not compatible with the Markaudio CHN-50 driver.

This flatpack cabinet has the recessed cut-out and pre-drilled holes for the Markaudio CHN-50 driver on the front baffle and a cutout for the Arylic Up2Stream wireless plate amplifier on the rear panel. It is not compatible with the Markaudio Alpair 5.3 driver.

Add this if you want us to build and line the cabinets with acoustic felt. We will give the built cabinets an initial sanding, but depending on the level of finish required, additional sanding may be required. The drivers, recessed terminal cups, and port tubes will not be fitted, this is something that you will need to do yourself. We will however build a pair of 30 cm internal cables that you can use to connect the drivers to the terminal cups. If you require finished (veneered or painted) fully built speakers, please contact us using this form, as this will be a bespoke build that we will need to quote for separately based on your requirements.