CHN-50 (pair)

Description

Mark Audio CHN-50

This driver is boxed and sold in pairs.

Datasheet

The CHN 50 is an very affordable new compact 3 inch full range driver suitable for use in small near field loudspeakers, as a quality mid-tweeter for low-crossover multi-way designs, and for line array speakers.

Markaudio have built a gentle rise into the low and high frequency response, as seen in some of their premium drive units, to enhance positioning flexibility. The sound presentation is forgiving, without glare, and the Thiele / Small parameters, with a generous 3.5mm (1-way) Xmax is balanced for ease of use.

The low-mass voice coil, suspension and shallow profile magnesium alloy cone are unique to the CHN 50. The pressed steel frame is designed to be very open and allow airflow to be as free as possible to the rear of the cone. Response extends from resonance to beyond 20KHz, and the impedance rise at higher frequencies is only modest, due to the careful motor design.

These paper drivers work well in our SL5-SD flatpack speaker kits, which are very easy to build and can be purchased here.

As usual Scott Lindgren has designed several speaker cabinets for you to DIY your own CHN-50 cabinet.

Markaudio CHN-50 Sub Compact Vented Box

Markaudio CHN-50 Compact Vented Box Standmount

Markaudio CHN-50 Compact Mass Loaded Horn

Markaudio CHN-50 Damped-Vent Standmount

Markaudio CHN-50 Sealed Box Standmount

Markaudio CHN-50 Slot Vent Box

Markaudio CHN-50 Mass Loaded Double Quarter Wave

Markaudio CHN-50 Compact Series Multichamber

Markaudio CHN-50 Compact Mass-Loaded Quarter Wave

Markaudio CHN-50 simple 3-driver soundbar

Markaudio CHN-50 six-unit soundbar

Markaudio CHN-50 simple vented soundbar

Markaudio CHN-50 simple quad soundbar

FS 113.1594 Hz
VAS 1.0965 L
RE 3.4000 Ohm
QMS 2.8318
QES 0.6865
QTS 0.5526
B×l 2.6869 T×m
SPL 85.74
SD 0.0028 m2
CMS 0.9822 mm/N
MMS 2.0871 g
RMS 0.5148 WM
RAT 329987 WA
RMT 2.6380 WM
MMD 2.0020 g
h0 0.21%
L1kHz0.0600 mH
PWR 7 watts (Nom)
X MAX (Mech) +/- 3.5mm