Hypex Nilai Stereo to dual mono adapter kit

Description

This kit allows you to upgrade your Hypex Nilai Stereo kit to full dual mono operation.

Until now you had the choice of buying either 2 mono kits for proper dual mono operation or sticking with stereo operation with the stereo kit. The stereo kit has 2 Nilal 500 DIY modules and one PS500DIY power supply. Using just one power supply throttled the stereo amplifier to 250W per channel rather than the 500W per channel that the 2 mono kits would allow. This new kit allows you to unlock the extra potential power along with the channel separation you’d expect from dual mono.

This is one of the most requested products from customers who had bought the stereo amp and wanted to later upgrade to dual mono, we now bring it to market.

What is included?

The adapter kit includes an aluminium adapter plate, a pack of machine screws and both the power and switching loom.

What is not included?

You will obviously need a second power supply as well, if you already have one, you are set, if not there is an option above to add one to the kit or you can follow this link and buy one separately.

We also offer an build service which can also be added above. If you send your stereo amp to us we will perform the upgrade to dual mono for you.

Easy install

The kit includes an adapter plate, a new power loom and a switching/control loom.

It’s an easy DIY upgrade just follow the step below or watch the handy video.

Step 1 – Disconnect the amplifier from the mains – please be aware that we offer a build service if you are not confident working with mains voltage.

Step 2 – Disconnect the existing power supply

Step 3  –  Unscrew and remove the power supply from the case.

Step 4 – Remove the existing power supply cable and the ribbon cable that connects the PSU to the small PCB mounted on the back panel – this cable carries switching signals from the front switch and the trigger

Step 5 – Screw the PSU to the supplied adapter plate along with the newly purchased second PS500DIY

Step 6 – Use the supplied screws to mount the adapter plate with its PSUs into the case

Step 7 – Re-connect the  cables from the amplifier modules

Step 8  – Connect the new ‘y’ type power supply cable to the IEC and then to both of the power supplies

Step 9 – Connect the new ‘ y’ type control ribbon to the small PCB on the back panel and using the longer of the 2 ends and then connect to the 2 PSU modules

Step 10 – Test and enjoy